Get Appoint with Roofing Contractors Long Island for Best Services
If the roof was actually even all the way across then it would be virtually impossible for all of the water to be drained from the roof, which would do nothing but create problems from the beginning. When you are having a Flat roof replacement Nassau County done on your home then you should inquire as to what angle of attack the roofing company has planned to address the drainage of water.
Avoid water issues with roof installation:
Roofers Long Island has to be done in a manner that is going to resolve stagnant water issues; otherwise you will be in the exact same predicament within a short period of time. The last thing you want to do is pay for the same job twice. Where your flat roof is located and how it is built is going to dictate which tactic is going to be best for you.
How roof installation works?
If you have a flat roof that has at least one open side, you can have your roofing Nassau County built up to include a natural slope that will be installed in a fashion to propel the water towards the open edge. 1/8 of an inch slope per foot is what has been common in the past and worked fine to this point, but to insure that the water takes the hint and flows in the right direction it is suggested that you have a flat roof replacement that includes at least a ¼ inch slope per foot of roof. Having that extra slope will not create any visual difference but it will help minimize the ability of water to pond.
How to avoid water issues on roof?
Your other option is to have a drain system on the roof that promotes the clearing of water off of the roof. A drain system is easy to install when you are getting a flat roof replacement done and should be discussed before the work begins.
If your roof has a retaining wall around all four sides or otherwise blocks water from having access to the edges of the roof then you are going to have to go with this option. The two ways of accomplishing a proper drain system are through the use of scuppers and adding drain pipes with inlets. Scuppers are metal flashing that are inserted into an opening that has been cut into the retaining wall.
Comments
Post a Comment